Results 1 to 1 of 1

Thread: SPTBOX2 Unlock/Flash INSTRUCTIONS

          
  1. #1
    Senior Member Retro_Post's Avatar
    Join Date
    Oct 2010
    Posts
    3,370
    Thanks
    0
    Thanked 8 Times in 8 Posts

    Default SPTBOX2 Unlock/Flash INSTRUCTIONS



    Repair Dead Phone by cable like
    GT-S5230, GT-S3650, F480i, GT-S5233, GT-S3653

    Procedure Of Repair Dead Phone Following:

    * Select Model And Mark Erase Region Bootloader
    * Press Repair Boot And Connect Phone to J750 Cable
    * Press and Keep Hand On Power On
    * Press Repair Boot
    * After Process Done

    * Don't Select Erase Region Bootloader
    * Press and Keep Hand On Power On
    * Press Repair Boot
    * After Process Done Put Phone Download mode and Write Flash With Boot.






    Procedure Of Unlock M3710L / S7070
    Following:

    * First Download Flash File At Support Area.
    * Select Boot file inside Flash folder.
    * Mark Reset Mslcode 16
    * Put phone Download mode ( Camera + Volume + Power)
    * Connect usb to phone select modem port
    * Press Write After Job Done Power on Phone and Check imei must be imei not active
    * Again Put Download Mode and Write boot with untick Repair mslcode 16
    * Connect phone powered to cable and Do Job With Factory mode



    Instruction to unlock OMAP phones like i8000 and others with USB MICROUSB DATA CABLE:


    1. Press *#7284# and select Phone USB
    2. Enter in Phone *#9090#
    3. Press 1 in new menu
    4. Connect to USB microusb cable (normal cable that is with phone in box)
    5. Wait untile drivers install
    6. Check in device manager on witch port is SAMSUNG DIAGNOSTIC PORT
    7. Turn on SPT software
    8. Select model
    9. Select in port setting COM PORT that is in device manager SAMSUNG DIAGNOSTIC PORT
    10. Select speed USB
    11. Select UNLOCK/IMEI
    12. Press FACTORY MODE
    13. After END turn on phone with simcard that not work and when ask for code enter 00000000
    14. That's all phone unlocked with USB cable


    To Perform Hard Reset For New Samsung GT-I8000 Do this:

    Call + Power + Volume + Keylock + Reset


    HOW TO FLASH OMAP OLDER PHONES (i450, i550 etc) PDA PART

    1=PUT PHONE IN PDA MODE [1+4]
    2=ATTACH USB CABLE AND INSTALL PERFECT DRIVERS [spt /drivers]
    3=select usb-0 + speed is 921600
    4=now total 6 files TO SELECT EXCEPT PHONE
    5=then press write
    6=WAIT FOR JOB TO COMPLETE


    HOW TO FLASH PHONE PART

    1=PUT PHONE IN DOWNLOAD MODE [7+*]
    2=select all file
    3=mark boot modem update
    4=battery must be full CHARGE
    5=PRESS WRITE WAIT FOR JOB TO COMPLETE

    Instroduction Of Unlock GT-I7500 Following:


    *Enter this code to Phone *#7284# in new menu select MODEM in both type.
    * Enter This Code To Phone *#197328640#.
    * And Menu Select 9. Go Next Menu Select 4. And Last Menu Select 1 After done reboot phone
    * Open Phone Menu And Goto Settings.
    * Open in Settings Menu Application Menu.
    * Select Development.
    * Usb Debugging.
    * Mark Off And Mark Again
    * Connect Phone USB Cable.
    * Install Driver Under SPT/Drivers Folder swallowtail-V4_48_0_0_WHQLed.zip
    * Mark Unlock
    * Rescan Port On Spt Then Select Port SAMSUNG DIAGNOSTIC PORT
    * Speed is USB
    * Press Factory Mode After ALL Job Done Insert Simcard.
    * When Phone Ask Unlock Code Enter 00000000 Then Press OK.
    * Voila Phone Unlocked.

    S8000 - S8003 Unlock And Imei Procedure

    * First Mark Reset Mslcode 16 And Write Boot
    * Now Without Mark Reset Mslcode 16 Rewrite Boot
    * And Power on phone Enter Following Code then connect phone and do process

    *#197328640#

    [8] Common --->
    [5] Usb Configuration --->
    [2] USB ACM -CP ---->
    USB ACM - CP COnfigured

    press end call and turn main menu

    again *#197328640#

    [8] Common --->
    [6] UART Configuration --->
    [1] DIAG ---->
    Diag SRVC Configured

    press end call and turn main menu

    again *#197328640#

    [8] Common --->
    [7] Service Configuration --->
    [2] DIAG Service ---->
    [2] USB DM/CP --->
    USB ACM/CP Configured

    Now Connect usb then repair imei mark and write imei press factory mode




    UNLOCK/IMEI REPAIR SAMSUNG S8300, S7350, S7330, S7220 and others olders UMTS with microusb connector

    Turn on phone without simcard.
    Enter *#782872#
    Connect to usb microusb cable
    select model in SPT SW
    select comport that is DIAGNOSTIC PORT in device manager
    select speed USB
    select LOCAL UNLOCK
    select QC MODE
    select UNLOCK
    Presss FACTORY MODE

    That it. Phone unlocked

    i8910 connection manual !! !!


    * Enter phone *#7284#
    * Select Modem (phone) usb
    * Connect Phone to Usb
    * Install Driver Qualcomm USB
    * Select Diagnostic Port
    * Enter *#197328640# and select 8 Common Then Diagnostic Menu And Usb Diag Enabled
    * Select Unlock or repair imei
    * Then Press Factory Mode

    Procedure Of Unlock
    S5620 Monte, B5310 Corby Pro, S7070 Diva, S5560
    Following:

    * Check firmware in phone by code *#1234#
    * Download Flash File At Support Area the same version or higher then is in phone.
    * Select any Boot file inside Flash folder (BOOTFILES directory).
    * Mark Reset Mslcode 16
    * Put phone Download mode ( VOL UP + HOLD + POWER ON )
    * Connect usb to phone select modem port ( port com in SW that in device manager is samsung modem)
    * Press Write and After Job Done
    * Again Put Download Mode and Write boot with untick Reset mslcode 16
    * Connect phone powered to usb cable and select IMEI(in box write org IMEI or other like you need) , select UNLOCK and Press Factory mode

    Unlock procedure for SAMSUNG C3300, C3303, C3303K, C3300K by USB CABLE !!
    Select model C3303k or any other depenting on phone to unlock
    Comport in spt sw select AUTO or live any other port if auto not present
    Speed select USB
    Select unlock
    Press SPT MODE
    In SW you got info:
    Press Volumn Down And Hold Key And Plug USB Cable.
    Do like is write and drivers are in spt directory "C3303" select it and all go well.
    That it. Phone unlocked !!

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. User Instructions Manual for UCT in English & Hindi
    By Retro_Post in forum Universal China Tool (UCT)
    Replies: 1
    Last Post: 11-24-2011, 05:22 PM
  2. Genie-Universal Manuals, Instructions, HowTo´s, etc.
    By Genie Universal in forum Genie Universal
    Replies: 0
    Last Post: 10-20-2010, 02:10 PM
  3. Replies: 0
    Last Post: 10-11-2010, 01:07 PM
  4. B119 Unlocking Instructions Check here
    By saviour in forum CDMA-Tool
    Replies: 0
    Last Post: 10-04-2010, 12:02 PM
  5. Replies: 0
    Last Post: 10-04-2010, 06:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •