Results 1 to 1 of 1

Thread: Samsung SPH-D710 Galaxy S2 Epic Touch 4G Unbrick Dead supported with RIFF JTAG

  1. #1
    Moderator Gsmman's Avatar
    Join Date
    Aug 2010
    Surat, Gujarat, India
    Thanked 32 Times in 25 Posts

    Thumbs up Samsung SPH-D710 Galaxy S2 Epic Touch 4G Unbrick Dead supported with RIFF JTAG

    Repair Samsung SPH-D710, S2, EPiC Touch 4G Dead

    Repairing bricked Samsung SPH-D710 Galaxy S2 Epic Touch 4G is easy with RIFF Box. Samsung SPH-D710 is based on the S5PV310 (Exynos 4210) Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
    Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

    To resurrect Samsung SPH-D710:

    • Solder JTAG cable to Samsung SPH-D710 JTAG pads;
    • Connect USB cable to phone and PC;
    • Insert battery;
    • Make sure Samsung SPH-D710 is selected in the list of models;
    • Make sure a fixed TCK frequency is selected;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable, de-solder JTAG wires;

    Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

    To enter download mode:

    • Disconnect PC cable;
    • Insert battery;
    • Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

  2. # ADS
    Circuit advertisement
    Join Date
    Advertising world
    Official iPhone Unlock - iUnlockStore World's most trusted iPhone Unlocking Solution -
    Official iPhone Unlock

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 08-25-2011, 10:49 AM
  2. RIFF JTAG -Samsung Galaxy S II Unbrick Support
    By GSM_Update in forum GSM News & Update
    Replies: 0
    Last Post: 08-05-2011, 12:46 PM
  3. Replies: 0
    Last Post: 12-30-2010, 06:00 AM
  4. Replies: 0
    Last Post: 12-13-2010, 10:18 AM
  5. Replies: 0
    Last Post: 09-11-2010, 11:30 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts