Thread: Hard soft reset with pictures

i-Mate JAM Hard Reset

To perform a soft reset

If your Pocket PC Phone responds slowly, stops responding, or freezes, you can soft reset it. A soft reset causes the Pocket PC Phone to restart and re-adjust memory allocation. Unsaved data in any opened applications may be lost. Use the stylus to press and hold the Reset button, as shown on the next page.



To perform a full reset


A full device reset clears memory, deletes all data and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain, erasing all data that you have created and programs you have installed. Press and hold the power button, and then use the stylus to press the soft reset button at the same time. Be sure you have backed up all your data in a SD card or on your PC before performing a full reset

Imate JAQ Hard Reset

Hard reset

1. Turn off your device.
2. Hold down the Send button, End button and Camera button.
3. Do not release Send, End and Camera, press the Power button.
4. After on-screen indication, release all the buttons.

E-Ten m600 Hard Reset

HARD RESET
(1) Press Power Button and Reset Button together and release them at the same time.
(2) Immediately before device starts to reboot, press and hold End Call Button for approximately 15 seconds until the "Erase all data and loads defaults ?" screen appears.
(i) If you wish to restore your device to the factory settings with the default WM5 OS and erasing all user data and user programs, press and hold the Speedial Button for about 5 seconds until the default "No" changes to 'Yes".
(ii) If you want to retain your user data and programs, do nothing and the system will choose the options "No" by default before rebooting your device.

Audiovox PPC-4100 Hard Reset

To perform a soft reset:

1. Remove the stylus from its holder.
2. Lightly press the tip of the stylus to the reset button
located on the rear panel of the device

To perform a hard reset:

1. Hold down the Power button on the front panel of
your device.

2. While holding down the power button , gently press
the tip of the stylus to the reset button.
The Confirmation message box appears.

3. Press the volume rocker key up.

I607 HARD RESET


To perform a manual Hard Reset, press the Up Navigation key and the [Power] key.

I600 hard reset enjoyyyyyyyyyyyyy

i-Mate JASJAR Hard Reset

To perform a soft reset

• Use the stylus to lightly press and hold the RESET button on the
left side of your device.
The device restarts and displays the Today screen.



To perform a hard reset

• Press and hold both SOFT KEYS shown enclosed by circles in
the picture below. Keep these keys pressed, and at the same
time, use the stylus to lightly press and hold the RESET button
on the left side of your device. Press either 0 to restore to factory
default or X to exit the hard reset process.

i-Mate PDA2K EVDO Soft Reset

To perform a soft reset :

If your Pocket PC Phone responds slowly stops responding or freezes, try a soft reset. A soft reset causes the Pocket PC Phone to restart and re-adjust memory allocation. Unsaved data in open windows may be lost.
Use the stylus to press and hold the Reset button.

To perform a full reset :

A full device reset clears memory, deletes all data and restores the Pocket PC Phone to its default settings. Programs installed at the factory remain, while data you have created and programs
you have installed are all erased.
Press and hold the power button, and then use stylus to press the soft reset button at he same time.

Be sure you have backup all your data in a SD card or in your PC before performing a full reset.

i-Mate PDA2K EVDO Soft Reset