Results 1 to 10 of 10

Thread: How to calibrate the touchscreen

          
  1. #1
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default How to calibrate the touchscreen

    Often we formatted devices (chinese miracle) at infinity and at the end he is calling to calibrate the touchscreen, but the touch escreen it is damaged and could have to calibrate the device is locked on that screen!
    I am posting the procedure so that everyone can understand and enjoy the service that the Team has given us infinity!

    1°-Find pinning your phone

    2°-Click the option SERVICE

    3°Read FullFlash



    4° After save BECKUP, click on the Repair tab.



    5°Now Click Calibrate Touchscreen

    6°The program will ask you if the BECKUP. click YES and indicates the location where you saved the Beckup!






    7°Press and hold the power to start the process, Release when the program send and wait to finish the process!





    Oks!Your phone now not asked to calibrate more Toouchscreen: for the program of infinity Copies exactly this part of BECKUP and rewrites the device, thus avoiding the application of calibration in the home screen!

    I hope it helped!

    <--------------------------------------------------------------->


    If this post was helpful, click on thank!

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
    Official iPhone Unlock - iUnlockStore World's most trusted iPhone Unlocking Solution -
    Official iPhone Unlock
     

  3. #2
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    COM4 [VCP0] selected
    module v2.93
    Action: touchscreen calibration
    How to calibrate touchscreen:
    - for this operation you need to have full flash backup from phone
    - if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
    - if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

    Do you have full flash backup ?
    Loading file v.02...
    Gabi_E307_JQ1_E307_GPRS_MT6225_S00.00_2__fullflash _20091007-172612.B0M.bin loaded
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing [6225:8A03:8A00]...
    CPU: MT6225
    high speed boot On
    chip: 0001:5903:000A
    status: FF
    Connecting at 19200, wait...
    Release Power button now !
    Phone detected, wait...
    Hardware: MT6225,E03
    Date: 2006.06.14
    Version: 1.0
    Version: E880_EVTST.01.0_25S00
    Version: EVEN25_HW
    44 byte(s) read
    imei: 35755600092547
    connection Ok
    512 byte(s) read
    163 byte(s) read
    reading data #2...
    512 byte(s) read
    writing data...
    verification...
    verification Ok
    Finished, time used: 13 sec
    Remove/Install battery now !

  4. #3
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    COM3 [VCP2] selected
    module v2.94
    Action: touchscreen calibration
    How to calibrate touchscreen:
    - for this operation you need to have full flash backup from phone
    - if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
    - if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

    Do you have full flash backup ?
    Loading file v.02...
    D78_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_04_MP_V1_20 __fullflash_20090807-112215.B0M.bin loaded
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing [6226:8A02:8A01]...
    CPU: MT6226
    high speed boot Off
    chip: 00318E1:17F4
    status: FF
    Connecting at 19200, wait...
    warning: wrong packet cs
    warning: wrong packet cs
    warning: wrong packet cs
    warning: wrong packet cs
    warning: wrong packet cs
    warning: wrong packet cs
    error: can not finalize test mode
    repeat operation and HOLD phone "Power" button long time !
    error: operation failed !
    Finished, time used: 82 sec
    Remove/Install battery now !

  5. #4
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    COM5 [VCP0] selected
    module v2.95
    Action: touchscreen calibration
    How to calibrate touchscreen:
    - for this operation you need to have full flash backup from phone
    - if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
    - if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

    Do you have full flash backup ?
    Loading file v.02...
    CELLTEL25_GEMINI_PCB01_GPRS_MT6225_S00.CBM16B_H_V3 23__fullflash_20091023-095414.B0M.bin loaded
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing [6225:8A05:8A00]...
    CPU: MT6225
    high speed boot On
    chip: 0001:8803:0007
    status: FF
    Connecting at 19200, wait...
    Release Power button now !
    Phone detected, wait...
    warning: can't read software version, probably unknown firmware
    67 byte(s) read
    connection lost
    error: operation failed !
    Finished, time used: 6 sec
    Remove/Install battery now !

  6. #5
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    problem solve i just retry the procedure
    COM5 [VCP0] selected
    module v2.95
    Action: touchscreen calibration
    How to calibrate touchscreen:
    - for this operation you need to have full flash backup from phone
    - if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
    - if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

    Do you have full flash backup ?
    Loading file v.02...
    CELLTEL25_GEMINI_PCB01_GPRS_MT6225_S00.CBM16B_H_V3 23__fullflash_20091023-095414.B0M.bin loaded
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing [6225:8A05:8A00]...
    CPU: MT6225
    high speed boot On
    chip: 0001:8803:0007
    status: FF
    Connecting at 19200, wait...
    Release Power button now !
    Phone detected, wait...
    Hardware: MT6225,E05
    Date: 2006.06.14
    Version: 1.0
    Version: CBM16B_H_V323
    Version: Celltel25_GEMINI_HW
    67 byte(s) read
    imei: 35877402000415
    connection Ok
    512 byte(s) read
    209 byte(s) read
    reading data #2...
    512 byte(s) read
    writing data...
    verification...
    verification Ok
    Finished, time used: 10 sec
    Remove/Install battery now !
    thanks infinity team for this useful post

  7. #6
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    Do you have full flash backup ?
    Cargando Archivo v.02...
    TL_M629_P42U06F09LO5_01_52__fullflash_20091031-120150.B0M.bin loaded
    Modelo: Autodetect 6205-6227 NOR
    Checkeando datos, espere...
    El Telefono deberia estar APAGADO !
    Mantenga Presionado el boton Power !
    19200 autodetect
    Iniciando [6225:8A05:8A00]...
    CPU: MT6225
    alta velocidad de boot On
    chip: 0001:1403:000A
    status: FF
    Connecting at 19200, wait...
    error: can not finalize test mode
    Repita la Operacion y mantenga Oprimido el boton Power por un poco mas de tiempo !
    error: La operación falló !
    Finalizado, tiempo usado: 82 sec
    Quite/coloque la bateria ahora !

  8. #7
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    module v3.02
    Action: touchscreen calibration
    How to calibrate touchscreen:
    - for this operation you need to have full flash backup from phone
    - if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
    - if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

    Do you have full flash backup ?
    Loading file v.02...
    BB13_PCB01_GPRS_MT6225_S00.BB13_BLE_L7EN_208_08050 9_HRILI9320_SIV0_TO75_CTF_BT_FM__fullflash_2009120 9-100029.B0M.bin loaded
    ffs/eeprom record offset detected
    ffs/eeprom record size detected
    ffs/eeprom record offset detected
    ffs/eeprom record size detected
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing [6225:8A03:8A00]...
    CPU: MT6225
    high speed boot On
    chip: 0001:3103:0000
    status: FF
    Connecting at 19200, wait...
    error: can not finalize test mode
    repeat operation and HOLD phone "Power" button long time !
    error: operation failed !
    Finished, time used: 20 sec
    Remove/Install battery now !

  9. #8
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    I am not getting a N97 chinese phone to calibrate the touch screen. The phone just won't connect. It connect to backup the flash and to FULL FORMAT the phone, but not SAFE FORMAT. I really need your assistance,. Please see the log Oh and yes i did hold the power button until it reachs 100%.

    COM1 [VCP0] selected
    module v3.02
    Action: touchscreen calibration
    How to calibrate touchscreen:
    - for this operation you need to have full flash backup from phone
    - if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
    - if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

    Do you have full flash backup ?
    Loading file v.02...
    RATECH25_GEMINI_PCB01_GPRS_MT6225_S00.M600_GSDSPA_ MLA_0_5T05S0429__fullflash_20091217-132338.B0M.bin loaded
    ffs/eeprom record offset detected
    ffs/eeprom record size detected
    ffs/eeprom record offset detected
    ffs/eeprom record size detected
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing [6225:8A05:8A00]...
    CPU: MT6225
    high speed boot On
    chip: 0001:9103:000F
    status: FF
    Connecting at 19200, wait...
    warning: wrong packet cs
    error: can not finalize test mode
    repeat operation and HOLD phone "Power" button long time !
    error: operation failed !
    Finished, time used: 77 sec
    Remove/Install battery now !

  10. #9
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    Hi, Infinity team! I did all procedure as described at the topic but the touchscreen doesn't accept calibration at last.

    ==== log: [20.12.2009 23:33:52] ====
    COM6 selected
    module v3.03
    Action: touchscreen calibration
    How to calibrate touchscreen:
    - for this operation you need to have full flash backup from phone
    - if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
    - if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure

    Do you have full flash backup ?
    Loading file v.02...
    E888_PXHT1F5_EVCOM_MT6225S00.GMV11COM_01_0_2009022 4__fullflash_20091220-233109.B0M.bin loaded
    ffs/eeprom record offset detected
    ffs/eeprom record size detected
    ffs/eeprom record offset detected
    ffs/eeprom record size detected
    Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing [6225:8A05:8A00]...
    CPU: MT6225
    high speed boot On
    chip: 0001:1603:0006
    status: FF
    Connecting at 19200, wait...
    Release Power button now !
    Phone detected, wait...
    Hardware: MT6225,E05
    Date: 2006.06.14
    Version: 1.0
    Version: E890_EVSMT3B.01.1
    Version: EVEN6225_GEMINI_HW
    67 byte(s) read
    imei: 35360103264115
    connection Ok
    512 byte(s) read
    215 byte(s) read
    reading data #2...
    512 byte(s) read
    writing data...
    verification...
    verification Ok
    Finished, time used: 12 sec
    Remove/Install battery now !
    Please check this file

  11. #10
    Senior Member InfinityBox's Avatar
    Join Date
    Oct 2010
    Posts
    1,322
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Default

    Hello I did. The phone connect to do the complete format. But won't connect to calibrate the touch screen. always error Model: Autodetect 6205-6227 NOR
    Checking data, wait...
    Phone should be Switched OFF !
    Press and HOLD Power button now !
    19200 autodetect
    Initializing [6225:8A05:8A00]...
    CPU: MT6225
    high speed boot On
    chip: 0001:9103:000F
    status: FF
    Connecting at 19200, wait...
    warning: wrong packet cs
    error: can not finalize test mode
    repeat operation and HOLD phone "Power" button long time !
    error: operation failed !
    Finished, time used: 77 sec
    Remove/Install battery now !

    PLEASE HELP!!!!!!


    Venom
    fr Jamaica

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Bypass damaged Touchscreen calibration solution...
    By InfinityBox in forum Chinese Miracle & Pin Finder
    Replies: 58
    Last Post: 10-22-2010, 08:42 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •